Search the Community

Παρακάτω ένα αρχείο όπου μπορείτε να βελτιώσετε το FFB. Είναι στο Controller.JSON "Force Feedback":{ "Brake effects on steer axis":0, "Brake effects on steer axis#":"0 = Brake effects on brake axis, 1 = brake effects on steering axis.", "Brake effects strength":10000, "Brake effects strength#":"-10000 to +10000, applies to all brake effects (force, vibration, static spring, etc?)", "Brake spring coefficient":0.3, "Brake spring coefficient#":"Static spring effect rate (-1.0 to 1.0)", "Brake spring saturation":1, "Brake spring saturation#":"Static spring effect peak force (0.0 to 1.0)", "Clutch effects on steer axis":0, "Clutch effects on steer axis#":"0 = Clutch effects on clutch axis, 1 = brake effects on steering axis.", "Clutch effects strength":10000, "Clutch effects strength#":"-10000 to +10000, applies to all clutch effects (force, vibration, static spring, etc?)", "Clutch spring coefficient":0.2, "Clutch spring coefficient#":"Static spring effect rate (-1.0 to 1.0)", "Clutch spring saturation":1, "Clutch spring saturation#":"Static spring effect peak force (0.0 to 1.0)", "G920_workaround":true, "G920_workaround#":"Workaround for Logitech G920 firmware bugs ... may need to turn this off after firmware update if it gets fixed.", "Gearbox effects on steer axis":0, "Gearbox effects on steer axis#":"0 = Gearbox effects on gearbox 'axis', 1 = brake effects on steering axis.", "Gearbox effects strength":10000, "Gearbox effects strength#":"-10000 to +10000, applies to all gearbox effects (force, vibration, static spring, etc?)", "Gearbox spring coefficient":0, "Gearbox spring coefficient#":"Static spring effect rate (-1.0 to 1.0)", "Gearbox spring saturation":1, "Gearbox spring saturation#":"Static spring effect peak force (0.0 to 1.0)", "Ignore controllers":0, "Ignore controllers#":"Do not use FFB on: 1=controller1, 2=cntrlr2, 4=cntrlr3, 8=cntrlr4, 16=cntrlr5, 32=cntrlr6, 64=cntrlr7, 128=cntrlr8 (or add values to ignore multiple controllers, for example 255 ignores all)", "Jolt magnitude":1.5, "Jolt magnitude#":"How strong jolts from other cars (or walls) are. Suggested Range: -2.0 to 2.0.", "Off-road multiplier":0.3, "Off-road multiplier#":"Temporary test variable to reduce force feedback strength off-road (0.0 = zero FFB, 1.0 = full FFB)", "Other spring coefficient":0.2, "Other spring coefficient#":"Static spring effect rate (-1.0 to 1.0) for any other FFB-capable controllers", "Other spring saturation":1, "Other spring saturation#":"Static spring effect peak force (0.0 to 1.0) for any other FFB-capable controllers", "Rumble strip magnitude":0, "Rumble strip magnitude#":"How strong the canned rumble strip rumble is. Range 0.0 to 1.0, 0.0 disables effect.", "Rumble strip pull factor":1.5, "Rumble strip pull factor#":"How strongly wheel pulls right\/left when running over a rumble strip. Suggested range: -1.5 to 1.5.", "Rumble strip update thresh":0.05, "Rumble strip update thresh#":"Amount of change required to update rumble strip effect (0.0 - 1.0)", "Rumble strip wave type":0, "Rumble strip wave type#":"Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.", "Steering effects strength":10000, "Steering effects strength#":"-10000 to +10000, applies to all steering effects (torque, resistance, static spring, jolt, etc.)", "Steering resistance coefficient":0.1, "Steering resistance coefficient#":"Coefficient to use for steering resistance. Range: -1.0 to 1.0", "Steering resistance saturation":0.1, "Steering resistance saturation#":"Saturation value to use for steering resistance. Range: 0 - 1.0", "Steering resistance type":0, "Steering resistance type#":"0=use damping, 1=use friction", "Steering spring coefficient":0, "Steering spring coefficient#":"Static spring effect rate (-1.0 to 1.0)", "Steering spring saturation":0.1, "Steering spring saturation#":"Static spring effect peak force (0.0 to 1.0)", "Steering torque capability":2.5, "Steering torque capability#":"The maximum torque capability of the wheel (in Nm, obviously)", "Steering torque extrap blend":0, "Steering torque extrap blend#":"Higher blends of extrapolated value allows driver to feel torque changes even when actual torque exceeds 'input max' (0.0=disables, 1.0=max)", "Steering torque extrap time":0.015, "Steering torque extrap time#":"Time in seconds to extrapolate steering torque based on current change (Range: 0.001 to 0.050. To disable, set 'blend' to 0.0)", "Steering torque filter":9, "Steering torque filter#":"Number of old samples to use to filter torque from vehicle's steering column (0-32, note that higher values increase effective latency)", "Steering torque minimum":0, "Steering torque minimum#":"Minimum torque to apply in either direction to overcome steering wheel's 'FFB deadzone' caused by friction", "Steering torque per-vehicle mult":1, "Steering torque per-vehicle mult#":"Per-vehicle steering column torque multiplier (this is a copy of the .CCH value)", "Steering torque sensitivity":1, "Steering torque sensitivity#":"Sensitivity curve applied to representable torques: 0.0=low 1.0=linear 2.0=high", "Steering torque zero-speed mult":0.3, "Steering torque zero-speed mult#":"Multiplier at zero speed to reduce unwanted oscillation from strong static aligning torque", "Test_workaround":true, "Test_workaround#":"Workaround for apparent driver CTD on release", "Throttle effects on steer axis":0, "Throttle effects on steer axis#":"0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis.", "Throttle effects strength":10000, "Throttle effects strength#":"-10000 to +10000, applies to all throttle effects (force, vibration, static spring, etc?)", "Throttle spring coefficient":0.1, "Throttle spring coefficient#":"Static spring effect rate (-1.0 to 1.0)", "Throttle spring saturation":1, "Throttle spring saturation#":"Static spring effect peak force (0.0 to 1.0)", "Type":1, "Type#":"Type of force feedback: 0=off 1=wheel 2=joystick 3=rumble\/gamepad 4=custom", "Use thread":false, "Use thread#":"Use a separate thread to issue FFB commands which may block with some drivers"